| Item | Specification | |
| Glove box |  Labstar Pro (1950/780), atmosphere with <1 ppm oxygen and moisture, Internal workspace |
|
| Optical reflectance measurement system |  |
|
| Ball mill |   Lab Planetary Ball Mill (Model: PQ4X-V0.4L), Ideal for both wet and dry grinding applications, Capacity, 2 or 4 jars, 25-100 mL |
|
| Centrifuge |  Beckman Coulter GS-15R Refrigerated Benchtop Centrifuge, Speed range: 0 to 15,300 rpm, Temperature setting: –20 to +40°C |
|
| Freeze dryer |  Labconco 4.5L Freeze Dryer System, Built in 10 port manifold, Collector Temperature: -50°C, -58°F, Ice Holding Capacity: 4.5 L |
|
| Ultrasonic cell |  VWR Q500 Sonicator, Qsonica, Adjustable pulse On and Off times: 1sec – 1min, a maximum setting hours: 10 hours, 500W |
|
| Vacuum oven |  MTI UL/CSA Class 25L, 50°C Vacuum Oven with 28 Segment Controller |
|
| Tube furnace |   Lindberg/Blue M Mini-Mite™ Tube Furnaces, Heated length: 30.5 cm (12″), bored for 2.54 cm (1″) O.D., overall dimensions, maximum temp.: 1100°C (2012°F), 16-Segment Programmable |
|
| Drying Oven |  VWR 3.65CF OVEN F AIR, temperature range, 50–250°C, three bench top sizes ranging from 2.3–6.3 cu. ft. |
|
| Temperature controller and high temperature chamber |  Lakeshore 330, Temperature controller with 2 diode/RTD inputs and 2 control outputs |
|
| Data acquisition switch unit, power supply |  Agilent HP 34970A, 3-slot mainframe with built-in GPIB and RS232 interfaces, HP 6627A, Output ratings (4 outputs):Low-range volts, HP/Agilent E3633A (1 output) |
|
| Optical sensor testing setup |  |
|
| 3D printers |   |
|
| Probe station |  |
|
| Chiller |  |
|
| Refrigerator/Freezer |  |
|
| Bath sonicator |  |
|
| pH meter |  |
|
| Coin cell disk cutter | ||
| Coin cell crimping machine | ||
| Temperature baths/reactors | ||
| Microscopes | ||
| Balances | ||
| Shaker |